Comment Retroussez une couverture solaire
A solar system for pool cover looks like bubble wrap very thick in appearance. Good quality solar blankets are made to last and there is very little that can go wrong with. However, there are some things that are made to ensure that the maximum length of the roof.
Keep swimming pool chlorine content of water in an acceptable range
While very little you can only go wrong with a solar blanket, the situation, a life-limitingexcess chlorine in the pool. If this happens over a long period of time it takes you to a state where the bubbles go on the ceiling, white milk, fragile and shaky, and his life is over.
Avoid this condition is very simple and will happen automatically if you follow a regular swimming pool maintenance routine. In general, most experts recommend maintaining swimming pool owners have their own pool watertested regularly, about every 4-6 weeks. In this way, and with the right advice following this test, the owner can maintain the right concentration of chlorine in the water at the pool just to keep in balance.
Due to the fact that a solar cover to slow the loss of the chemical in a pool of experiences through evaporation, it is also recommended that the solar blanket is mounted to the first water test should be within a weekthe ceiling is installed. In this way, along with the regular testing tap water, chlorine attack the problem of too much sun on the cover is removed.
Always provide a solar cover, solar cover is when you are not already in the water
Solar blanket pool covers are very good conductors of heat from the sun and for this reason they should have a time limit be extended not exposed to the sun when they are not protected on the surfacewater.
In this case, running to cover the risk of burns, limit the duration of life. Fortunately, the remedy for this situation is also simple. If the solar cover is on a subject pool that is the role that almost certainly were “supplied with an indoor pool with sun roof. This is to cover the pool when it is rolled on the roller and protect it from the sunset.
If the pool cover is not suitable, a role which should coveronly when direct sunlight is not stored on the swimming pool. Both of these measures will prevent the cover pool of burning but not in the pool.
So, to take measures to extend coverage to the life of your new swimming pool is as easy as 1,2,3 which are:
1. Let your equipped pool water through your pool professional attention in the first week the pool is tested.
2. Take your pool water tested regularly, about every four minutes sixWeeks as part of your overall routine maintenance of the pool. This will give you an early warning when the pool water is always connected “chlorinated”.
3. When the lid is not the pool water, the lid must generate to be protected from direct sun for its heat capacity, which can cause burning in the cover. The use of roller pool cover to protect or preserve the pool cover from direct sunlight.
By following these three simple steps, you canYou can expect that the pool solar blanket coverage of her life last maximum.
Related posts
